|
|
|
|
|
Non-metal Gaskets
|
 |
Non-asbestos Gasket
Description:Non-asbestos
Gasket is a sealing material made by adding kevlar fibre,special
adhesives or rubber and a little packing into it, then roll and
sulfurated .Non-asbestos Gasket is a replacement of asbestos gasket.It
has better strength, elasticity and supper strong anti-penetrate
performance.It is a better choice than asbestos gasket in high
temperature...Click
for details
|
|
 |
Asbestos Gasket
Description:Asbestos
gasket can be used for most medium specification applications.It can be
used for sealing against steam,air, gases, water, oils, hydraulics and
non-aggressive media.This gasket can also be used in high pressures and
sealing steam, air, gases, water, oils, hydraulics...Click
for details
|
|
 |
PTFE GASKET(Teflon Gasket)
Description:PTFE
gasket is made by cutting PTFE stick, pipe and sheet into flat shape
PTFE gasket, v shape PTFE gasket or valve annulus PTFE gasket.PTFE
gasket has 100% PTFE structure.This kind of gasket can bear the most
bitter chemical medium and has good anti-creeping performance.It is a
replacement of asbestos. PTFE gasket is anti-creeping, anti-cold-flow..Click
for details
|
|
 |
PTFE
Envelope Gasket
Description:PTFE
envelope gasket are use for type of static seal.It is composed of
elastic materials. such as PTFE envelope gasket composed of compressed
non-asbestos sheet and a PTFE envelope cove,PTFE envelope gasket
composed of rubber and a PTFE envelope cove,PTFE envelope gasket
composed of Ceramics and a PTFE envelope cove,etc.It has superior
properties against...Click
for details
|
|
 |
Rubber
Gasket
Description:Rubber
gasket is cut from NBR,SBR,CR,EPDM.Some rubber gasket have resisttance
of oil,Some rubber gasket is used in cold fever,Some rubber gasket has
anti-aging properties.There are various shapes of rubber gaske.Rubber
gaskets are widely used in medicine,
electronics,Chemical,anti-static...Click
for details
|
|
 |
Expanded
PTFE Gasket
Description:Expanded
PTFE Gaskets and Seal materials consist of virgin PTFE with
multidirectional fibrous and/or porous structure, which the extruded
PTFE consists of. A special manufacturing process provides the material
with special chemical and physical properties...Click
for details
|
|
 |
O-ring
Gasket
Description:An
O-ring
is a round
ring
that is used as a gasket for sealing a connection.
O-rings
are typically constructed out of
polyurethane, silicone, neoprene, nitrile rubber or fluorocarbon.
These rings are commonly used in mechanical applications, such as pipe
connections, and help to ensure a tight seal...Click
for details
|
|
 |
Heat Insulation Gasket
Description:
Made from ceramic fiber paper.It could be cut into suitable shapes.
Comressive trength:0.38Mpa
Thickness:0.5-5mm...Click
for details
|
|
 |
Molded
Graphite Ring For Exhaust
Description:
Die-formed Graphite Rings For Exhaust are
made of low-sulphur expanded graphite with metal wire fillers or
binders. The fillers enhance the strength of the graphite
rings.Die-formed Graphite Rings For Exhaust are compressed in precise
moulding tools to the required density.It is mede from the high purity
of the material (>99%), no special corrosion protection is required. In
general, Die-formed Graphite Ring has square section and also has
V-shaped and wedge-shaped section...Click
for details
|
|
|
|
|
|
